Automotive
Filters
- 1/4'' (1)
- 1/2'' (1)
- 8mm (1)
- 10mm (1)
- 12mm (1)
- 12.4mm (1)
- 12.6mm (1)
- 14.4mm (1)
- 15mm (2)
- 16.5mm (1)
- 26mm (1)
- Aftermarket Wheels (1)
- ALFA (5)
- Audi (4)
- Automotive G (49)
- BLACK FRIDAY (11)
- BMW (51)
- CHEVROLET (2)
- Chrysler (3)
- CITROEN (7)
- DACIA (1)
- DAF (1)
- Diesel (6)
- FIAT (14)
- FORD (28)
- Fuel Injector Line Socket Set (1)
- GM (2)
- HONDA (3)
- HYUANDAI (1)
- ISUZU (2)
- JAGUAR (2)
- JEEP (1)
- JLR (9)
- KIA (1)
- LANCIA (4)
- Land Rover (6)
- M5 (1)
- M6 (1)
- M8 (1)
- M10 (1)
- M12 (1)
- MAN (1)
- MAZDA (6)
- Mercedes (24)
- MINI (13)
- MITSUBISHI (3)
- NISSAN (7)
- no collection (15)
- Opel (29)
- Petrol (5)
- PEUGEOT (8)
- Porsche (2)
- PSA (8)
- RENAULT (12)
- ROVER (1)
- SAAB (5)
- Seat (3)
- Skoda (2)
- SUBARU (1)
- SUZUKI (1)
- Tesla (1)
- TOYOTA (1)
- VAG (20)
- Vauxhall (29)
- VOLVO (5)
- VW (4)
CT4763 - Pump Pulley Remover - VAG
NeilsenVAG Pump Pulley RemoverFor the removal of the high pressure pump hubon 1.6L and 2.0L TDi common rail diesel engines.OEM Code : T40064
CT5885 - Timing Tool Set - VAG TFSI
NeilsenVAG Timing Tool Setfor 2.9 / 3.0 TFSI EA839 Petrol EnginesDesigned to fix the camshafts in positionwhen removing and installing the camshaft timing...
View full detailsCT4638 - Crankshaft Rotation Tool - VAG
NeilsenVAG Crankshaft Rotation Toolfor VAG 5 Cylinder EnginesNecessary for crankshaft adjustment and as use as a lever.Suitable for all 5 cylinder VW dies...
View full detailsCT5467 - Vibration Damper Assembly Tool - VAG
NeilsenVAG Vibration Damper Assembly ToolSpecially designed to fix the timing chain drive sprocketswhile installing and removing the vibration damper o...
View full detailsCT5485 - Camshaft Pulley Holding Tool Set - VAG
NeilsenVAG Camshaft Pulley Holding Tool SetDesigned to hold camshaft / crankshaft / oil pump and water pump pulleys and sprockets while loosening and tigh...
View full detailsCT4992 - 21pc Locking Wheel Nut Key Set - VAG
NeilsenThe CT4992 is a 20-piece unique socket set that includes a 17mm alloy wheel nut socket for easy removal of locking wheel nuts on VW vehicles. It co...
View full detailsCT5226 - 20pc Locking Wheel Nut Key Set - VAG & SEAT
NeilsenThe CT5226 20pc Locking Wheel Nut Key Set comes with 20 unique sockets that are specially designed for removing locking wheel nuts on VAG & Sea...
View full detailsCT4130 - 5pc Socket SET for Bosch Diesel Injector Pumps
Neilsen5pc Socket Set with a unique profile specifically designed for Bosch Diesel Injection Distributor Pumps. These sockets are essential for anyone wor...
View full detailsCT4644 - Timing Tools Set - VAG
NeilsenVAG Timing Tool SetFor New Jetta / Santana / Gran Lavida / Golf 7Locks camshaft when checking and adjusting timing1.0 MPI and 1.0 MPI / GNC Petrol ...
View full detailsCT5734 - Front End Support Guides - VAG
NeilsenVAG Service Position Front End Support Guide SetSuitable for extending the front panel of the vehicle to provide increased space in engine compartm...
View full detailsCT5871 - Timing Chain Tension Lever - VAG
NeilsenVAG Timing Chain Tension Leverfor 1.8 / 2.0 TFSi Petrol EnginesAllows the timing chain tensioner to be retracted and lockedwithout removing the low...
View full detailsCT4084 - Crankshaft Seal Flange Installation Tool - VAG
NeilsenVAG Crankshaft Seal Flange Installation ToolSpecially designed tool to renew the crankshaft oil seal on Audi / VW vehiclesApplicable to 16V / 20V -...
View full detailsCT0031 - Crankshaft Seal Flange Installation Tool - VAG
NeilsenVAG Crankshaft Seal Flange Remover and Installerfor 1.4 and 1.6 - 16 Valve VAG enginesfitted to Audi / Skoda / Fiat and VW vehiclesEngine code BAG ...
View full detailsCT4655 - Crankshaft Pulley Holding Tool - VAG
NeilsenAudi / VW Crankshaft Pulley Holding ToolFor holding the crankshaft pulley when removing or installing the crankshaft central bolt.AUDI : A3 | A6 | ...
View full detailsCT5397 - Harmonic Balance Tool - VAG
NeilsenBalance Shaft Puller with Slide HammerFor VAG 1.8L | 2.0L 4 cylinder petrol chain driven injection engines.Audi - 2007 to 2017Seat - 2006 to 2017Sk...
View full detailsCT4752 - Camshaft Adapter Socket - VAG
NeilsenVAG Camshaft Adapter Socket3/8in. Drive / S45C Steel.Use to rotate and hold the intake camshaft during timing chain serviceon 4 cylinder 1.8L an...
View full detailsCT4990 - 22pc Locking Wheel Nut Key Set - VAG
NeilsenThe CT4990 - 22pc Locking Wheel Nut Key Set includes a variety of keys specifically designed to fit locking wheel nuts, making it simple to remove ...
View full detailsCT3988 - 23pc Locking Wheel Nut Key Set - VAG
NeilsenCT3988 - 23pc Locking Wheel Nut Key Set. Designed specifically for VAG vehicles, this set includes 23 pieces, including a range of multi-ribe and s...
View full detailsCT4227 - 12pc Locking Wheel Nut Key Set - VAG
NeilsenThe CT4227 consists of 12 unique spline and ribe bits and is specifically designed to remove locking wheel nuts on most VAG vehicles. The set inclu...
View full detailsCT4028 - 5pc 1/2in Dr Tri-Point Socket Set for Bosch Injector Pumps
NeilsenThis socket set is perfect for Triangular Profile Tamperproof Fixings and features five different socket sizes: M5 - 8mm M6 - 10mm M8 - 12mm M10 -...
View full details