Engine & Transmission

9pc Pick and Hook Set with Gasket ScraperHeavy DutyIdeal for Gasket Scraping / Hose Removal etc.

Wide Application – For most diesel applications, brushes are specially engineered to fit injector seats.Great Function – Used to remove rust, carbo...

17pc Diesel Injector Seat Cutter SetFor decarbonising injector seats when changing injectors.Helps to avoid blow-back due to poorly seated injector...

Working diameter: 87-89mmShaft diameter: 7.8 mmMax. drive speed: 300 rpm

25pc Spark Plug Thread Repair KitComprehensive and time saving kit for spark plug thread repair.Especially suitable for the repair of deep-seated p...

Heavy Duty Nut Splitterwith 3 - 24mm Jaw C-FrameSmooth Action cracks nuts without damaging bolt threadsChisel Rotates to line up parallel to boltAd...

10pc Injector Clamping Bolt Thread Repair Set for Mercedes-BenzSuitable for reaming the broken-off expansion boltand repairing the M6 thread in the...

Fuel Injector Gasket / Seal PullerFor the extraction of fuel injector copper washers.Slim shaft with threaded conical tip and slide hammer.

Fuel Injector Removal / Installation Tool Kitfor BMW MINI Petrol Engines B38 / B48For extracting or fitting plastic bodied petrol injectorsused on ...

6pc Pick and Hook SetExtra Long Combination Pick and HookStraight Pick90 degree PickDouble Angle PickComplex Pick

For Removing the DSG Gearbox ECU / mechatronic control moduleAudi / VW 7-speedSpecially designed to remove load from plungers of the mechatronic un...

Working diameter: 81-83mmShaft diameter: 7.8 mmMax. drive speed: 300 rpm

JLR Crankshaft Pulley Tool SetCrankshaft Pulley removal and holding tool.The Crankshaft Pulley needs to be removed for engine servicing.Applicable ...

14mm Spark Plug Re-Thread SetCleans and Rethreads Spark Plug PortsIncludes Tap and 4 Inserts - 3/8. 7/16. 1/2. 3/4in.

3pc Scraper SetSizes : 10mm x 270mm | 25mm x 220 and 310mmIdeal for De-carbonising cylinder heads / pistons and other engine parts.Chrome-Vanadium

Thread Repair Kit for Glow Plugs - M8 x 1.0Taps and coil inserts for repairing M8 glow plug threads.5 x 12mm Deep Insertswith black phosphate finis...

Exhaust Hanger Pliersfor removing the Rubber Grommets from exhaust mountsFits a wide range of vehicles and modelsSaves time and energy.Long rubber ...

Adjustable Seal Pullerwith 2 Hook ShapesWith rotating head for removing various oil and grease seals

Application: Compatible with Ford Focus DCT Dual Clutch Transmission DPS6Function: Reuse a Dual Clutch Assembly that has been removed/previously in...

Fuel Injection Pump Sprocket ToolFor high pressure fuel pump sprockets fitted toHyundai and Kia 2.0 | 2.2 CRDi diesel engines.Allows the fuel pump ...

10mm Spark Plug Re-Thread SetCleans and Re-threads Spark Plug PortsIncludes Tap and 4 Inserts : 3/8 | 7/16 | 1/2 | 3/4in.

Piston Ring CompressorDepth 3in. / 75mmDiameter : 60 - 175mmwith Hex Drive Key

Swivel Head Oxygen Sensor Wrench7/8in. / 22mm

Diesel Injector Removal Hydraulic Upgrade KitProviding 17 Ton Hydraulic force for diesel injector removers allowingthe controlled extraction of ...

4pc Hook & Pick Set - Extra Long90 degree Hook90 degree Pick / Goose Neck Pick / Straight Pick

DSG Clutch Bearing Gauge Block ToolFor checking and adjusting the position of clutch bearingsin automatic 7 speed / DSG gearboxes with dual clutch....

Clutch Alignment Tool KitFor clutch discs with 15 to 28 mm clutch hubs.Provides accurate centring of the clutch discon most vehicles with or withou...

11pc Clutch Alignment and Adjustment Tool SetSuitable for a wide range of vehicles and some light commercial vehicles.Screw action provides fast ad...

Working diameter: 94-96mmShaft diameter: 7.8 mmMax. drive speed: 300 rpm

Working diameter: 75-77mmShaft diameter: 7.8 mmMax. drive speed: 300 rpm

Working diameter: 87-89mmShaft diameter: 7.8 mmMax. drive speed: 300 rpm

Spare drill bits for CT3381

For repair of defective oxygen sensor threadsReamer Ø 18.6 mm, for reaming of oxygen sensor threadsTap M20 x 1.5, for cutting the repair bushing th...