Specialised Sockets

INNER: 80MM; OUTER: 95MM; H: 175MM; STUD:87mm; STUD WIDTH: 10mmLOCATING TUBE: 49MMInternal square drive to DIN 3121/ISO 1174.Rigid locating tube.Op...

●3/4'' Drive●Inner: 100mm●Outer: 123mm●Height:84mm●Positive drive of the axle nut●Any extensive slipping is avoided.●Milled out profile.●Robust exe...

18pc Impact E-Socket Set3/8in. and 1/2in. Drive3/8in.Dr : E5 | E6 | E7 | E8 | E10 | E11 | E12 | E14 | E161/2in.Dr : E10 | E11 | E12 | E14 | E16 | E...

INNER: 105MM; OUTER: 125MM; H: 180MMSTUD:116.5mm; STUD WIDTH: 9.8mmInternal square drive to DIN 3121 /ISO 1174 .Rigid Locating tube.High accuracy o...

INNER: 133MM; OUTER: 147.5MM; H: 155MM;  STUD:118mmSTUD WIDTH: 11mmInternal square drive to DIN 3121 / ISO 1174 .Six sided drive SW 60.Optional wit...

Six side drive SW60.Special robust execution designed to remove the front axle nut.Made from special steel for high tightening and loosening torque...

INNER: 95MM; OUTER: 115MM; H:110MM; STUD :101MMSTUD WIDTH:11.5MMInternal square drive to DIN 3121 /ISO 1174. Optional with sleeve Locating tube.Hig...

Made from special steel and robust execution to remove the axle nut.Any extensive slipping is avoided.Use with an impact wrench or torque wrench, d...

IVECO Axle Nut Socket,110 mmINNER: 110MM; OUTER: 134MM; H: 118MMSix sided drive SW 36.Positive drive of the axle nut.Any extensive slipping is avoi...

MAN&BENZ Drive Axle Nut Socket (Dr,3/4,H60,6 TEETH) Special designed with 6 teeth designed for removing the drive axle nut.Made from special st...

Efficiently and safely install the transmission oil seal for SCANIA transmission flange shafts on both the transmission and rear axle.  Scania Tran...

Stubby & low profile design for working in confined areas.CRMO3/8 F x 1/2 M

A complete set of  EPR 5 sided Star Plus profile sockets.Contents:5 x 1/4": EP6, EP7, EP8, EP10, EP11. length 25 mm5 x 3/8": EP12, EP14, EP16, EP18...

6pc Star / E-Type SocketsSizes : E10 | E12 | E14 | E16 | E18 | E20.1/2in.Dr x 140mm longUsed for cylinder head bolts

This product, CT6341 - Engine Crank Alignment DAF, is designed to work with a 1/2" drive wrench. It is suitable for use with XF105, Euro5, and othe...

Stubby & low profile design for working in confined areas.CRMO1/2 F x 3/4 M

4pc HGV Brake Calliper Socket SetHex 8mm | 10mm | S8 and 11PT12mm Hex Drivefor Commercial SAF / NFZ / Knorr brake Calliper systems

6 point with 1/4'' drive: EP4, EP5, EP6, EP7, EP8 ;6 point with 3/8'' drive: EP10, EP11, EP12, EP14, EP16 ;6 point with 1/2'' drive: EP18, EP20, EP...

This socket, designed for use with Iveco vehicles, is specifically made to perfectly fit and turn 6-sided axle nuts measuring 98mm. ●Any extensive ...

16pc Hex / Star / E-Socket and Bit SetWith 3/4 and 1in. Drive Adaptors plus 4mm Hex KeyHex Bits : 17 | 19 | 22 | 24mm x 107mm LongStar Bits : T60 |...

34pc 3/8in.Dr Star Bit & E-Socket SetStar Sockets : E4 to E20Star Bits : T10 to T6025mm Star Bits : T10 to T55 Tamper ProofBit Adaptor : 3/8in....

120MM Axle Nut Wheel Capsule Socket for BPW Axles - designed for efficient and precise installation. Suitable for all BPW Axles with a 120MM size. ...

Stubby & low profile design for working in confined areas.CRMO1/4 F x 3/8 M

Suspension Strut Socket - VAGGo-Thru Socket for use with a 22mm Spanner or SocketFor loosening Audi / VW suspension strut nuts. Black finish

27pc Star Socket and Bit Set3/8in. / 1/2in.DriveStar Sockets 3/8in.Dr : E10 . E12 . E14 . E16 . E18Star Sockets 1/2in.Dr : E20 | E22 | E 24Star Bit...

Special 6 teeth designed to remove the differential rear nut.Made from special steel for high tightening and loosening torque.Applicable: MAN, Merc...

AXLE NUT / WHEEL CAPSULE SOCKET | FOR BPW AXLES | 80 MM The socket is specifically designed to fit BPW axles and has a size of 80mm. This ensures a...

60pc Master Star Bit and E-Socket SetStar Sockets -1/4in.Dr : E4 | E5 | E6 | E7 | E83/8in.Dr : E10 | E11 | E12 | E14 | E161/2in.Dr : E18 | E20 | E2...

12pc Star Bit & Driver Set1/4in. and 3/8in. DriveSizes : T10 | T15 | T20 | T25 | T27 | T30 | T40 | T45 | T50 | T55

With 3/4“ square drive to DIN 3121 / ISO 1174 Special profile with 8 external studs Positive drive of the axle nut Any extensive slipping is avoide...

To install front wheel hub of MAN.There is a bearing inside the tool to save power.Use this axle with spanner spin the screw.Robust Execution.Very ...

Best tool for replacing MAN tractor hub bearings and removing the old bearings essential tool.Turn the screw and remove the old bearing.European tr...

Scania Rear Wheel Shock Absorber Spring Washer Socket34mmX56mm Dr.3/4"For mounting and dismounting of leaf spring boltsSturdy designFlat oval formT...

●12 point-13mm●External hexagon drive: 19mm●Ideally for the dismantling and assembly of brake discs●For machinery usage●CRMO

Designed socket for Mercedes-Benz valve adjustment.Application on Mercedes-Benz M100, 110, 114, 115, 123, 130 models.Size: 17mm x 1/2"D.

Practical connector system with fixing screw.Useful for different groove socket nutsEnables stable work positionPrevents slippage of the socketChan...

Practical connector system with fixing screw.Useful for different groove socket nutsEnables stable work position

Practical connector system with fixing screw.Useful for different groove socket nutsEnables stable work positionPrevents slippage of the socketChan...

Special designed to remove the wheel axle with outer thread on BPW.Use with 49mm and 30mm wrenchApplicable: For former model of 16 tons truck.

Certain stop through ring shaped bearing areaUse with 32mm wrench.Applicable: HALDEX ●Allows tightly brake linkage adjusters to be pulled off.●Ring...

Crankshaft Rotator For Mercedes-Benz ●Allows the engine crank to be manually adjusted.●Allows pinpoint accuracy calibration.●Adjusting screw in the...

Scania Damper Rod Socket For Rear Axles,(34mmX46mm Dr.3/4")For mounting and dismounting of leaf spring boltsSturdy designFlat oval formTorque-preci...

MAN Truck Transmission Socket,53mm Designed to remove the transmission nut on MAN trucksSize: 3/4" DR x 53.5mm / 4PTOverall length: 75mm ●Designed ...