Products

Free Floating Piston Valve results in less wear and tear in comparison to market standard twisting piston valvesDouble O-Ring allows for a much bet...

Adjustable radiator test adaptor suits most vehicle’s radiator pressure cap.Application: MB, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi...

BPW Rear Hubcap Nut Socket,111mm●The rear axles cover extractor socket.●Size: Hex 41mm x110mm(oval) ●Applicable: Bpw-12T●8PT

BPW Rear Hubcap Nut Socket 95mm ●Designed for extracting the rear axle cover●Size: 3/4'' DR. x 95mm(oval)●Overall length: 70mm●Applicable: BPW 6.5~9T

 The rear axles cover extractor socket. Size: H41 x 120mm ( oval internal profile)  ●The rear axles cover extractor socket.●Size: H41 x120mm(8PT) ●...

●The rear axles cover extractor socket.●Size: Hex 41mm x109mm(8PT) ●Applicable: BPW 12T ●8PT●For loosening/tightening the rear axle hub retaining n...

 1" DR, INNER: 83MM; OUTER: 103MM;  H: 74MM Positive drive of the axle nut Any extensive slipping is avoided Milled out profile Robust execution Ca...

●3/4'' Drive●Inner: 100mm●Outer: 123mm●Height:84mm●Positive drive of the axle nut●Any extensive slipping is avoided.●Milled out profile.●Robust exe...

3/4"DR; INNER: 28.5MM; OUTER: 53.9MM; H:50MMScania Front Wheel Shock Absorber Spring Washer Socket,(28mmX37mm Dr.3/4") ●3/4'' Drive●Size: 28 x 37mm...

Made from special steel and robust execution to remove the axle nut.Any extensive slipping is avoided.Use with an impact wrench or torque wrench, d...

Wheel Capsule And Axle Nut Socket65mm ●Designed for high tightening and release torques.●Suitable for: BPW axles●Drive Size: 3/4''Dr●Wrench size: 6...

AXLE NUT / WHEEL CAPSULE SOCKET | FOR BPW AXLES | 80 MM The socket is specifically designed to fit BPW axles and has a size of 80mm. This ensures a...

Axle Nut Wheel Capsule Socket For 13 t BPW Front Axles 85MM This socket is precisely designed for easy and secure installation of Axle Nut Wheel Ca...

Axle Nut Wheel Capsule Socket For BPW Axl The unique design of the CT6312 allows for easy installation and removal of axle nuts. It's the perfect t...

Axle Nut Wheel Capsule Socket For BPW Axles 100MM Effortlessly remove and install axles with this high-quality socket. It's perfect for trucks and ...

120MM Axle Nut Wheel Capsule Socket for BPW Axles - designed for efficient and precise installation. Suitable for all BPW Axles with a 120MM size. ...

This socket, designed for use with Iveco vehicles, is specifically made to perfectly fit and turn 6-sided axle nuts measuring 98mm. ●Any extensive ...

IVECO Axle Nut Socket,110 mmINNER: 110MM; OUTER: 134MM; H: 118MMSix sided drive SW 36.Positive drive of the axle nut.Any extensive slipping is avoi...

Made from special steel and robust execution to remove the axle nut.Any extensive slipping is avoided.Use with an impact wrench or torque wrench, d...

For professional loosening and tightening the clamp nut on the axle stub.Suitable for exact torque with a 3/4" square drive. ●For loosening / tight...

For professional loosening and tightening the clamp nut on the axle stub.Suitable for exact torque with a 3/4" square drive. ●For loosening / tight...

Six side drive SW60.Special robust execution designed to remove the front axle nut.Made from special steel for high tightening and loosening torque...

INNER: 95MM; OUTER: 115MM; H:110MM; STUD :101MMSTUD WIDTH:11.5MMInternal square drive to DIN 3121 /ISO 1174. Optional with sleeve Locating tube.Hig...

MAN&BENZ Drive Axle Nut Socket (Dr,3/4,H60,6 TEETH) Special designed with 6 teeth designed for removing the drive axle nut.Made from special st...

MAN Truck Transmission Socket,53mm Designed to remove the transmission nut on MAN trucksSize: 3/4" DR x 53.5mm / 4PTOverall length: 75mm ●Designed ...

INNER: 133MM; OUTER: 147.5MM; H: 155MM;  STUD:118mmSTUD WIDTH: 11mmInternal square drive to DIN 3121 / ISO 1174 .Six sided drive SW 60.Optional wit...

Scania Rear Wheel Shock Absorber Spring Washer Socket34mmX56mm Dr.3/4"For mounting and dismounting of leaf spring boltsSturdy designFlat oval formT...

Scania Damper Rod Socket For Rear Axles,(34mmX46mm Dr.3/4")For mounting and dismounting of leaf spring boltsSturdy designFlat oval formTorque-preci...

INNER: 105MM; OUTER: 125MM; H: 180MMSTUD:116.5mm; STUD WIDTH: 9.8mmInternal square drive to DIN 3121 /ISO 1174 .Rigid Locating tube.High accuracy o...

INNER: 80MM; OUTER: 95MM; H: 175MM; STUD:87mm; STUD WIDTH: 10mmLOCATING TUBE: 49MMInternal square drive to DIN 3121/ISO 1174.Rigid locating tube.Op...

Designed to remove the wheel axle with outer thread on BPW.Use with 43mm and 30mm  wrench.

Crankshaft Rotator For Mercedes-Benz ●Allows the engine crank to be manually adjusted.●Allows pinpoint accuracy calibration.●Adjusting screw in the...

Best tool for replacing MAN tractor hub bearings and removing the old bearings essential tool.Turn the screw and remove the old bearing.European tr...

To install front wheel hub of MAN.There is a bearing inside the tool to save power.Use this axle with spanner spin the screw.Robust Execution.Very ...

Certain stop through ring shaped bearing areaUse with 32mm wrench.Applicable: HALDEX ●Allows tightly brake linkage adjusters to be pulled off.●Ring...

With 3/4“ square drive to DIN 3121 / ISO 1174 Special profile with 8 external studs Positive drive of the axle nut Any extensive slipping is avoide...

 The tool removes and installs diesel injected nozzle. The bottom four comers. Europe truck repair tool. 24MM, 4 teeth, inner 22.2mm, outer 32mm, 8...

Special 6 teeth designed to remove the differential rear nut.Made from special steel for high tightening and loosening torque.Applicable: MAN, Merc...

Special designed to remove the wheel axle with outer thread on BPW.Use with 49mm and 30mm wrenchApplicable: For former model of 16 tons truck.

Designed for accurate rotating of the engine for •valve setting or other maintenance and service work.Use with 1/2” drive wrench.Ocerall length: 61...

Designed to remove the wheel axle with outer thread on BPW.Use with 49mm and 30mm  wrench.Applicable: for former model of 16 tons truckOuter diamet...

Designed to rotate the crankshaft when correct the timing of engine. Use with 1/2” drive wrench. Applicable: SCANIA after 1996 Improve engine perfo...

  This product, CT6341 - Engine Crank Alignment DAF, is designed to work with a 1/2" drive wrench. It is suitable for use with XF105, Euro5, and ot...

This 1/2"DR electromagnetic injection valve cap socket is designed for both tightening and loosening. With a 38mm inner diameter and 45mm outer dia...

Efficiently and safely install the transmission oil seal for SCANIA transmission flange shafts on both the transmission and rear axle.  Scania Tran...

This calliper adjuster socket features a unique five-tooth design that allows for precise adjustments of brake calipers. It has a 24mm hex drive an...

Made from special steel and robust execution to remove the axle nut.Use with an impact wrench or torque wrench, drive with 32/46 mm wrench.Forward ...

Practical connector system with fixing screw.Useful for different groove socket nutsEnables stable work positionPrevents slippage of the socketChan...