Steering and Suspension

CT2831 Ball Joint Separator Ball Joint Separator - Jaw size 15/16in.Knurled shaft for better gripDrop forged steel construction

Hydraulic Coil Spring Compressor Pumpfor Coil Spring Compressors : CT1321 and CT1945

3pc VAG Steering Knuckle Pinch-Bolt Driftfor use when 9-10mm drift is requiredon VAG vehicles with 4 link suspension.Applicable to Audi A4 / A6 and...

●Designed to hold and support suspension struts when use with hydraulic vertical transmission jack or gearbox stand, prevents the strut from moving...

For removing and installing of the drive shaft nutallows inserting of the rear differential pinon sealsuitable for BMW vehicles with rear and four ...

Universal Coil Spring CompressorAngled Jaws for wishbone multi-link suspension.Easier and more convenient to position inside the spring.Prevents ov...

Oetiker CV Drive Shaft Boot Clamp PliersThese pliers are designed to fit the Oetiker CV Drive Shaft boot Securing clips.They have a plate that pres...

Universal Wishbone Lever Tool with ChainMaximum Traction : 500kgTotal Length with Hook : 1030mmClamping Height : 65mm to 265mmChain length includin...

Used to remove and install suspension struts while leaving the hub on the vehicle, designed to keep the suspension hubs separate and open.The doubl...

CV Joint Boot Clamp Pliers - Ear TypeIdeal for installing clamps on fuel filters - water pumps - CV joint boots and other cooling system hoses

Universal Tie Rod Wrench - 1/2in.DrRange from 27mm to 42mmEasily removes inner tie rod ends without disassembling rack and pinion Designed specific...

11pc Special Socket Set orBall Joint Socket Set1/2in.Dr Sizes : 22 - 75mm4 Tooth Sockets for removing castellated lock nuts found on ball joints / ...

●Heavy-duty ball joint separator tool, equivalent to JLR OEM 204-793A, for use on various Land Rover and Jaguar vehicles. ●The scissor type design ...

For quick and accurate alignment of the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment.Widely u...

CV Joint Boot Clamp ToolFor the assembly of Stainless Steel Bands3/8in.Dr Jaws for use with a Torque WrenchFor torque sensitive rubber boot clamps

8pc Hydraulic Nut Splitter  ●The hydraulic ram provides up to 10 tonnes of direct non-twisting application of thrust that is more effective and sec...

Electric Power Steering Rack Socket For BMW, Mercedes-Benz ●3 pin rack thrust socket with 24mm Hex drive.●For assembling, disassembling and adjustm...

7in. Ball Joint / Tie Rod SeparatorFork Type SeparatorJaw : 15mm A durable and versatile tool that makes separating ball joints and tie rods quick ...

For disassembly and assembly of the differential rubber bushing in the rear axle carrierApplicable: BMW 5, 6, 7 series F01, F02, F04, F06, F07, F10...

VW Audi Rear Suspension ToolFor replacing the rear axle mounted bushingsUsed in-situ on the vehicle without the need to remove the axle assemblyAll...

Inner Tie Rod Service KitInner Tie Rod Installer / Remover Tool SetThis kit is specially designed for inner tie rods that are inaccessible to ad...

Heavy Duty Coil Spring Compressor with BraceFeatures adjustable safeguard brace that prevents accidental release of spring under load and also enab...

3pc Universal Press Support Ring SetSmall - Diameter :115mm / 100mmHeight : 160mmWall : 7.5mmCapacity : 10TMedium - Diameter : 140mm / 120mmHeight ...

30mm Ball Joint Remover for cars, light trucks and SUVOpening on the support fork : 30 mmOpening on the puller housing: 55 mmMax. pressure range: 5...

43mm / 12pt Ball Joint Socket - Mercedes BenzFor loosening and tightening the supporting joint flat nut.The socket allows the supporting joint p...

For changing of bushes and ball joints without having to remove suspension legs, subframes, wishbones and trailing arms etc from the vehicle. Desig...

2pc Coil Spring Compressor355mm Jaw CapacityFor use On or Off vehicles when working on suspension strutsCan be use with a 1/2in.Dr Ratchet or 21mm ...

Scissor Ball Joint Separator The Scissor Ball Joint Separator is a specialized tool designed for safely and efficiently removing ball joints from v...

Track Rod End Remover / Installer Set - 4pcFor easy removal and replacement of the inner steering ball jointwithout the need to dismantle the steer...

CT2997 CV Boot Clamp Pliers CV Boot Clamp Pliers - 2pc SetCrimps and flattens ear type clampsCV Clamp Banding ToolFor installing CV ClampsStan...

Hydraulic Ball Joint SplitterForged steel body ball joint splitter suitable for light commercial vehicles.Use manually or with 1.5 Tonne hydraulic ...

62mm Ball Joint Remover for cars, light trucks and SUVOpening on the support fork: 62 mmOpening on the puller housing: 100 mmMax. pressure range: 1...

Audi / VW Ball Joint Toolfor holding the lower ball jointwhen removing and installing onAudi A4 | A5 | A6 | A7 | Q5