Automotive Sockets

It's designed to use on over-tightened or seized rear wheel nuts on Ducati or Triumph models.Applications: Ducati 748 ,848, 916, 996, 998, Hypermot...

For installing and removing the VANOS adjuster.Applicable: BMW B38, B48, B58 engine.BM number: 2450487.Size: 1/2”Dr x 22mm / 16PT.Cr-Mo

Designed to remove the wheel axle with outer thread on BPW.Use with 49mm and 30mm  wrench.Applicable: for former model of 16 tons truckOuter diamet...

Special designed to remove the wheel axle with outer thread on BPW.Use with 49mm and 30mm wrenchApplicable: For former model of 16 tons truck.

Special 6 teeth designed to remove the differential rear nut.Made from special steel for high tightening and loosening torque.Applicable: MAN, Merc...

 The tool removes and installs diesel injected nozzle. The bottom four comers. Europe truck repair tool. 24MM, 4 teeth, inner 22.2mm, outer 32mm, 8...

With 3/4“ square drive to DIN 3121 / ISO 1174 Special profile with 8 external studs Positive drive of the axle nut Any extensive slipping is avoide...

To install front wheel hub of MAN.There is a bearing inside the tool to save power.Use this axle with spanner spin the screw.Robust Execution.Very ...

Practical connector system with fixing screw.Useful for different groove socket nutsEnables stable work positionPrevents slippage of the socketChan...

Practical connector system with fixing screw.Useful for different groove socket nutsEnables stable work position

Practical connector system with fixing screw.Useful for different groove socket nutsEnables stable work positionPrevents slippage of the socketChan...

Made from special steel and robust execution to remove the axle nut.Use with an impact wrench or torque wrench, drive with 32/46 mm wrench.Forward ...

Efficiently and safely install the transmission oil seal for SCANIA transmission flange shafts on both the transmission and rear axle.  Scania Tran...

This 1/2"DR electromagnetic injection valve cap socket is designed for both tightening and loosening. With a 38mm inner diameter and 45mm outer dia...

This product, CT6341 - Engine Crank Alignment DAF, is designed to work with a 1/2" drive wrench. It is suitable for use with XF105, Euro5, and othe...

Designed to rotate the crankshaft when correct the timing of engine. Use with 1/2” drive wrench. Applicable: SCANIA after 1996 Improve engine perfo...

Electric Power Steering Rack Socket For BMW, Mercedes-Benz ●3 pin rack thrust socket with 24mm Hex drive.●For assembling, disassembling and adjustm...

Crankshaft Rotator For Mercedes-Benz ●Allows the engine crank to be manually adjusted.●Allows pinpoint accuracy calibration.●Adjusting screw in the...

BPW Rear Hubcap Nut Socket 95mm ●Designed for extracting the rear axle cover●Size: 3/4'' DR. x 95mm(oval)●Overall length: 70mm●Applicable: BPW 6.5~9T

CR-MO material, with corrosion-resistant black phosphate finish for durability.Male: 3/16", 1/4", 9/32", 5/16", 11/32", 3/8"; Female: 1/4", 9/32", ...

Specialist tool designed to be used when removing the top of Macpherson strut mounts. These are commonly found on Audi, SEAT, Skoda and VW vehicles...

●18pcs socket: 6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24mm●10pcs Deep socket: 8,9,10,11,12,13,14,15,17,19mm●8pcs E socket: E8,E10,E11,E12,E...

●1/2'' Drive-18pcs socket: 10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27,30,32mm-2pcs Deep socket 14,15mm-2pcs E socket: E20,E24-3pcs Deep impact...

For removing and tightening of grooved nuts according to DIN 981 standard on shafts, clamping or pulling sleeves etc.Suitable for following groove ...

For removing and tightening of grooved nuts according to DIN 981 standard on shafts, clamping or pulling sleeves etc.Suitable for following groove ...

5pc 1/2in.Dr Castellated Socket Set - MercedesGearbox / differential flange / front axles and bearings / rear axle drive flange6 / 8mm Tooth x 70 /...

5pc Tesla Wheel Locking Nut Key SetApplicable to Tesla Models : 3 / S / XIdentified as : A / B / C / D / EFor use with a 21mm Alloy Wheel Nut Socke...

9pc Wheel Stud Cleaning SetBrushes fit most wheel studs.Metric : 12 |13 | 14 | 16 | 22 | 28mmImperial : 7/16 | 1/2 | 9/16 | 5/8 | 7/8 | 1-1/8in....

BPW Axle Extractor - M136 x 2.5Extremely robust European truck repair tool applicable to :BPW ECO Plus 8 - 12 ton and BPW ECO 10 ton models.Used in...

72mm Differential Nut SocketFor loosening or tightening the castellated differential nutused on the Mercedes-Benz Citaro and Evo Buses.Castellated ...

Mercedes Rear Axle Groove Nut SocketFor 6 teeth groove nuts on low-floor buses with SF portal axle AV132 -Mercedes-Benz Citaro Bus / MAN City-Line ...

Extension Tube for MAN TGA Rear AxleFor the removal and installation of wheel hubs.Protects the wheel bearing and threaded bolts.With knurling and ...

MAN / TGA Front Axle Lock Nut Socket3/4in.Dr / 60mm Hex Drive.Inner diameter : 134mmOuter diameter : 147mmLug diameter : 118mm / width 11mmApplicab...

17pc Brake Calliper Socket & Bit SetFor disassembling of brake Callipers when replacing the brake pads.Impact Hex Bits : 1/4 and 3/8in.DrH7 x 2...

Fuel Pump Removal Toolfor BMW X1 | X3 N47 2.0 Diesel EnginesApplicable to :1 Series : E81 | 82 | 87 | 883 Series : E90 | 91 | 92 | 935 Series : E60...

4pc HGV Brake Calliper Socket SetHex 8mm | 10mm | S8 and 11PT12mm Hex Drivefor Commercial SAF / NFZ / Knorr brake Calliper systems

Suspension Joint Pin Socket - 1/2in.DrFor use on castellated suspension joint nuts.Applicable to PSA - Citroen / Peugeot Vehicles :Citroen BX : 9 /...

8pc Common Rail Diesel Injector Repair KitFor repairing common rail diesel injectors Bosch / Siemens and Denso.Set comes with all necessary sockets...

5pc 1/2in.Dr Castellated Socket Set - MercedesGearbox / differential flange / front axles and bearings / rear axle drive flange6 / 8mm Tooth x 70 /...

13pc Special Socket Setwith Internal Teeth for Grooved LocknutsSizes :18 | 22 | 25 | 28 | 32 | 38 | 45 | 52 | 58 | 65 | 70 | 75 | 80mm60mm Long wit...

8pc Antenna Socket SetFor Automotive ICE and Antenna NutsAlso the remote control mirror adjustment lever and ball joint sleeve.Suitable for most po...

Suspension Strut Socket - VAGGo-Thru Socket for use with a 22mm Spanner or SocketFor loosening Audi / VW suspension strut nuts. Black finish

6pc VAG Axle Nut Socket SetHex Bits : 14 | 17mm - 1/2in.DrSpline Bit : M18 - 1/2in.DrSockets : 24 | 30mm - 1/2in.DrSocket : 32mm - 3/4in.Dr14mm Hex...