Automotive

●Application:FORD 1.0 l / 1.1 l and 2.0 l EcoBoost enginesB-Max, C-Max, EcoSport, Fiesta, Fiesta, Active, Focus, Grand C-Max, Grand Tourneo ,Connec...

●This product is a automobile brake fluid/coolant boiling point detector. Detecting the boiling point of brake fluid to judge the quality of brake ...

• Extra Long Puller for deeply set bearings, gears, taps and bushes.• Maximum size of bearing: 50mm• Arm spread: 10 to 50mm• Reach:  230mm• Self-ce...

Front Main Crankshaft Oil Seal Installer - ISUZU 3.5T Designed to ensure the correct fitment of the front crankshaft oil seal on the 3.5 tonne Isuz...

Vauxhall / Opel Pump Sprocket RetainerFor 2.2 Chain Drive Petrol Engines.Used to keep the engine in the timed position duringremoval / installation...

●Suitable for the quick removal of pinstriping, decals, stickers, adhesive tape, and residue from car bodywork without damaging the surface.●The fl...

●Fluted stripe off disc with heat dissipating pattern for removing pinstriping, decals, stickers, adhesive tape, and residue from car bodywork with...

Syphon Pump

COUPLING LOCK 110X110MPrevents the connecting-up / theft of your trailer, horse-box or caravanFits almost all coupling systemsHandy and robust design

Designed to use with 1/2" short extension.Damaged wheel (lug) nut removal sockets.Applications: Ford, Jeep and Range Rover.

●Suitable for a 48mm jockey wheels and prop stands.●With a thick washer.●Mounting holes 18mm wide 125mm apart.●Cast steel construction.●Fits on CT3...

Specifically designed to pull out the ignition coil - Equivalent to OEM KM 6009Applications: Agila-A, Astra-F/G/H/J, Calibra, Combo, Corsa-B/C/D, F...

Applications: Toyota Dyna & Dynaps 140 (rear); Toyota Dyna & Rino (front). Isuzu NPR (front & rear).Length: 99mm; Hex profile.Material:...

Applications: Mitsubishi Canter & Canter FE111 (rear).Length: 99mm; Hex profile.Material: CRMO

Allows body shop technicians to hold lift gate or hatch in a partially open position for sanding, painting, buffing,or totally open to easily repla...

Enables body shop mechanics to keep the lift gate or hatch partially open for sanding, painting, buffing,or fully open for convenient lift strut re...

●For checking the timing chain elongation on VAG 1.2 and 1.4L TFSI engines.●Allows the timing chain wear to be accurately measured with the minimum...

Easy, fast, reliable method for pulling strut towers.Bolt size: 16 x 110mmCapacity: 5Ton(Straight way), 3Ton(Cross way)

Double Grab Hook assembly chain pulling clamp chain shortener autobody repairSuitable for 3/8""(10mm) chain (grade G70).Forged heat treated steel.F...

Capacity: 1 ton (Transverse Load) 5 Ton(Longitudinal Load) 1 Ton(Cross Load)For more sheet metal applications.Bolt size: 14mm x 70mm, 12mm x 60mmFo...

Capacity: 3 tonSingle-way pull operation.No distorting due to the security deviceFor car body repairs.Bolt size: 16 x 80mm

Two directions of pull.Eyelet fixed on one side.Bolt size: 12 x 70mmCapacity: 3Ton(Straight way), 1Ton(Cross way)For car body repairs.

Single-way pull operation.Self-tightening serrated jaws for a positive gripFor more sheet metal applications.Bolt size: 14x 70mmFor car body repair...

Capacity:5 ton (Straight way), 1 ton (Cross way)Two-way pull operation.Self-tightening serrated jaws for a positive gripBolt size: 14x 70mmFor car ...

Capacity:5 ton (Straight way), 1 ton (Cross way)Two-way pull operation.Self-tightening serrated jaws for a positive gripBolt size: 16x 80mmFor car ...

●Capacity:3 ton (Straight way), 1ton (Cross way)●Two-way pull operation.●Both sides of the jaws are unique in order to fit into the confined space●...

●Self-tightening serrated jaws for a positive grip●Single-way pull operation.●Bolt size: 14 x 120mm●Capacity: 3Ton●No twisting by safety device. ●F...

●Self-tightening serrated jaws for a positive grip●Single-way pull operation.●Bolt size: 12 x 70mm●Capacity: 3Ton●For car body repairs Vehicle Repa...

To protect your engine, oil filter cutters allow you to cut through old filters to find problems before they cause damage to your engine. Help you ...

●A two piece kit including a pin puller and a pin popper, removes door hinge pins fast.●Better clearance for door panels.●Direct impact design.●Dri...

●For collecting and transferring liquids such as oil, brake fluid or water●Litre scale in the tub●Practical holder for oil filter cartridges●With p...

Large capacityFeatures lowered corner for easy pouring.Dimensions: 830 x 550 x 90mm

85 piece kit containing a selection of 'T' type, 'L' Type, Offset, Angled (90° & 102°) & Snap Lock (Delphi) connectors, complete with FKM o...

AdBlue Transport Tank - 75L / 12VPowerful 12V pump capable of delivering up to 10 L/min.With a working pressure of 40 psi.4M Power cable for con...

Chain Connector for 2 chainsSuitable for use with CT0969 & CT5459

VW R2/T4/A3 Camshaft Pulley PullerIdeal for removing rusted or seized pulleys.For in-situ car maintenance.Adjustable legs fit different diameters o...

●Strong sturdy & durable construction.●Corrosion resistant.●Durable handle for extra strength and ease of use.●Secure locking cap to prevent sp...

The 10050 - Screen Wash is a high-performance cleaning solution designed to keep your windshield and windows crystal clear in all driving condition...

Steering Wheel Lock Plate RemoverIdeal for detaching steering column lock plates on the majority of cars with air bags1-9/16in. x 18mm and 14 x 1.5...

Medium: DieselFlow rate: 40 l/minMaterial: polyethyleneVoltage: 12 V●The special design of the carry tank allows space-saving transport of diesel o...

Fuel your engine with ease and efficiency with our 220L Plastic Diesel Fuel Tank. This durable tank is designed specifically for engineering lightw...

Application on Mini Clubman 2015 to 2017,Mini Convertible 2016 to 2017,Mini Clubman 2015 to 2017, BMW 1&3 Series 2015 to 2017, 2 Series 2014 to...