Bearing Tools

13pc Special Socket Setwith Internal Teeth for Grooved LocknutsSizes :18 | 22 | 25 | 28 | 32 | 38 | 45 | 52 | 58 | 65 | 70 | 75 | 80mm60mm Long wit...

Bearing Separator Set2 Sizes : 50 and 75mm4 Sets of Hex Push-Puller Legs and Bar-Type Puller Head125mm Puller Cross-Bar with 160mm Forcing Screw

Universal Press and Pull Sleeve KitPress Sleeves from 34 - 80mm Diameter in 2mm stepsOutside Diameter from 44 - 90mm in 2mm steps5 x Pulling Spindl...

Universal Hub Puller Kit with Hydraulic Ramgiving up to 12 Tons of pressure with a large slide hammer assembly.The kit greatly simplifies the remov...

Replacement M12 Pulling Spindlefor Universal Press and Pull Sleeve Kits CT2934 or CT3757

Replacement M16 Pulling Spindlefor Universal Press and Pull Sleeve Kits CT2934 or CT3757

Replacement M14 Pulling Spindlefor Universal Press and Pull Sleeve Kits CT2934 or CT3757

Replacement M18 Pulling Spindlefor Universal Press and Pull Sleeve Kit CT2934

Replacement M10 Pulling Spindlefor Universal Press and Pull Sleeve Kits CT2934 or CT3757

Wheel Bearing Tool Set for Ford | Land Rover | VolvoFor GEN2 wheel bearingsFord - Focus II.5RS | Focus 2.5RS 50Ford - Mondeo MkIV from 2007Galaxy f...

Blind Hole Bearing Extractor Set - 16pc Puller and Slide-HammerScrew Adaptors - M6 x 1.0 / M8 x 1.25 / M10 x 1.5Collets - 8 - 11mm / 12 - 17mm / 18...

450MM X M12 Spindle  To Fit CT3187

3pc Universal Press Support Ring SetSmall - Diameter :115mm / 100mmHeight : 160mmWall : 7.5mmCapacity : 10TMedium - Diameter : 140mm / 120mmHeight ...

450MM X M14 Spindle To Fit CT3187

52mm Impact Socket 1/2in.Drfor Land Rover Hub Wheel Bearing Nutson Land Rover Classic | Discovery | Defender / 83 -and most other Land Rovers regis...

The CT3526 is a 9-piece dent puller slide hammer set composed of a 5lb slide hammer with a finger grip handle for enhanced grip, a metal pulling sc...

●Designed for installation and removal of silent bearings, hydro bearings, bushings, ball bearings, simmer rings, shaft seals, rubber bearings etc....

26pc Universal Press and Pull Sleeve KitFor the removal and installation of bushes / bearings and seals etc.Fully universal applications on both ca...

Applications: Silent bushings, hydraulic bushings, ball bearings, oil seals, rubber bushings, etc.This kit is ideal for different commercial vehicl...

21pc Wheel Bearing and Seal Installation KitSuitable for mounting bearings and sealing rings.Particularly useful when used with a hydraulic pres...

11pc Bearing and Seal Driver SetFor the Installation of Bearings and SealsDrive Flanges : 39.5 | 44.5 | 50 | 59 | 63 | 65 | 72 | 76 | 81mmwith Alum...

Small Universal Press Support RingOuter diameter : 115mmInner diameter : 100mmHeight : 160mmWall : 7.5mmCapacity : 10Tfor the removal of Wheel Bear...

Fast Fit Micro Puller 19 - 45mmSupplied with thrust shaft extensionCapacity : 1 tonReach : 73mmPuller Reach : 19 - 73mm / Min-MaxPuller Spread : 19...

 450MM X M16 Spindle To Fit CT3187

14pc Bearing Splitter and Gear Puller SetBearing Separators 9/32 - 3in.Bolts / Nuts and Washers 5.5in. - M12 Thread6in. Pawls 3/8in. -M16 Thread...

9pc Bearing Puller SetRemoves gears / pulleys and steering wheels.Drop forged / heat treated steel attachments.3lb x 390mm slide hammer with T-hand...

5pc Bearing Puller SetBearing extractor collets with internal capacity from 11 to 32mm Collets : 10 - 14mm | 15 - 19mm | 18 - 25mm | 25 - 32mm3/8 -...

Small Insert Bearing Puller KitFor the removal of bearings where normal pullers are unable to be used by locking into the bearing race itself.Adjus...

8pc Rear Axle Bearing Puller & Slide Hammer SetWith Small / Medium and Large Bearing Puller Adaptorscover inner diameters from 1 to 1-7/8 | 1-5...

5 Ton Gear Puller Set2 and 3 Way Short and Long Legs.Legs now with Ratchet Action to hold legs in place to aid one man operation.Jaw Range :Short L...

Large Universal Press Support RingOuter diameter : 180mmInner diameter : 160mmHeight : 160mmWall : 10mmCapacity : 40Tfor the removal of Wheel Beari...

Universal Bearing Packer111mm Cone Diameter.Suitable for packing bearings with an even spread of Grease.A Clean and Quick method - place bearing on...