Brake Tools

●Spend less time fitting a new caliper by repairing the bleed nipple, suitable for repair Brake Caliper Bleed Nipple M8 to M10.●Three simple steps:...

Disc Brake Ratchet Pad SpreaderThe ratchet allows a full 360 degree swing so that the spreader may be placed at any position.A centrally located ra...

The CT5150 features eight colour-coded blades that quickly measure wear and determine the remaining life of brake pad linings. The offset blade is ...

The CT5738 Adjuster for Accelerator & Brake Pedals allows for a time-saving and efficient way to set engine speed, check emissions, and inspect...

For resetting the brake pistons on Iveco disk brakesSuitable for Iveco Stralis, Eurocargo, DailyIncludes the following tools:10 mm ratchet wrenchre...

3pc Brake Disc Run Out KitAllows the DTi gauge to be mounted in almost any positionagainst the brake disc to measure disc warp.DTi Gauge accurate t...

Brake Drum Gauge 160 - 360 MM ●Developed to measure the wear limit on brake drums as well as the diameter of the drum and then establish the shoe p...

Specially designed to separate the brake service push rod from brake pedal.Application: Audi A4, VW Bora (1998 – 2008), VW Beetle, etc.VM number: T...

4pc HGV Brake Calliper Socket SetHex 8mm | 10mm | S8 and 11PT12mm Hex Drivefor Commercial SAF / NFZ / Knorr brake Calliper systems

For aligning deformed brake lines, use on pipes up to 4.75 mm (3/16'') and 6.35 mm (1/4'') in diameter.T-bar handle and triple roller design for pr...

15pc Brake Calliper Thread Repair SetFor rethreading brake Calliper bolt holes using M12 x 1.5mm insertsStepped drill allows you to oversize the ho...

Clamp For Strut Insert Pistons 60mm Bolts ●This tool is particularly useful when working with struts that are built with strong ‘tension stop sprin...

The CT2575 8PC Brake Tool Set is designed for the installation, removal, and adjustment of drum brakes and brake shoes. Crafted to minimize the eff...

Brake Caliper File - 150mm Blade

The CT4398 Drum Brake Spring Pliers are suitable for most vehicle drum brakes. One end grips onto the brake lining while the other hooks onto the s...

17pc Brake Calliper Socket & Bit SetFor disassembling of brake Callipers when replacing the brake pads.Impact Hex Bits : 1/4 and 3/8in.DrH7 x 2...

The CT3283 is specifically designed for brake pad replacement on various BMW, Ford, and VW/Audi vehicles, ensuring a perfect fit every time. Handle...

●Enables easy access to the retaining clips behind the rear drive flange.●For easy removal and fitting of the shoe retaining clips on the handbrake...

3pc 1/2in.Dr Socket and Bit Set Brake Servicing KitPentagon Profile

Specially designed to separate the brake service push rod from the brake pedal.Application: Porsche Cayenne, VW Touareg 2003 and onwards.OEM number...

Specially designed to separate brake serve push rod from brake pedal.Application: VW Passat 2015 – 2016, Phaeton.OEM T10159B / T10159A:To be used a...

Tubing Straightener Designed to withstand the rigorous demands of workshop and repair environments.Made from aluminium materials.Engineered to stra...

Disc Brake Pad PullerFor the quick removal of disc brake pads.Especially useful where brakes have seized.Insert pins in pad and use mini slide hamm...

Disc Brake Pad SpreaderThis Brake Pad Spreader is suitable for mostATE / Bendix / Delco and Girling Callipers.Use on standard and 4-Piston Disc Bra...

Specially designed to separate brake servo push rod from brake pedal.Applicable:  Audi Q5 2009 and onwards.OEM number: T40136.

6pc Brake Spanner SetSizes- 8 x 10mm Hex9 x 11mm Hex1/4in x 7mm Hex1/4in x 10mm Square1/4in x 5/16in. Open End7/16in. Open End 11/32in. Square

The CT4532 15-piece brake service tool set includes a variety of essential tools for servicing your vehicle's brakes. From brake line flare nut wre...