Bricklaying Tools

Brick Jointer Barrels for CT3741Sizes : 3/4in. & 7/8in.

175mm T-Type Bricklaying Profile ClampZinc plated to prevent corrosion.

Double pins Making the Dori left and right handed.Compatible with 40,50,50.8mm steel/aluminium profiles, 51mm x 50mm to make the brick gauge.Materi...

Mortar SpikeFor holding the internal profile steady by pushing into perp jointand tightening screw on the profile.Solid Steel / Zinc Plated

Made from 50mmx50mmx1.5mm box section with a nice 6mm solid bracket to tighten up on. Works with all profiles as-long as you are using 50mm x 50mm ...

Adjustable tool to make it faster to set up profiles.Includes 90 degree L-Bracket (TOPL), two nail on brackets (TOPN) and one Top G-Clamp (TOPG).19...

12in. / 300mm Bricklaying Profile ClampT-Bolt Screw / 80mm ThreadSolid Steel / Zinc Plated

Adjustable tool to make it faster to set up profiles for internal corners and full brick jobs.Includes 90 degree Top Clamp L-Bracket (TOPL), two To...

Clamp length: 440mm - suits one block / two bricks. Bar thread length: 80mmMaterial: Zinc plated steel for superior corrosion resistance

Double pins making the dori left and right handed.Compatible with 40,50,50.8mm steel/aluminium profiles, 51mm x 75mm to make the brick gauge.Materi...

2 x External Stabiliser Clips Blakes Building ProfilesExternal Stabiliser Clip Complete with screws - supplied as set of 2 (1 x Stabiliser used per...

22in. / 560mm Bricklaying Profile ClampSliding withT-Bolt Screw / 80mm ThreadSolid Steel / Zinc Plated

4X External Line Holder Clips for Builder Brick Building Profiles Blakes PT 4 x External Line Holder Clips for Builders Brick Building Profiles Bla...

Replacement L-Bracket for 19mm Top Clamps.Length: 750Width: 290

7in. / 178mm Bricklaying Profile ClampT-Bolt Screw / 80mm ThreadSolid Steel / Zinc Plated

Gauge Tape is ideal for marking up your Building Profiles, helping to improve your accuracy of bricklaying.This quality laminated, waterproof tape ...

Replacement nail on brackets for 19mm Top Clamps (TOP)Zinc plated to prevent corrosion

12in. / 300mm Bricklaying Profile ClampT-Bolt Screw / 80mm ThreadInternalSolid Steel / Zinc Plated

Gauge Tape is ideal for marking up your Building Profiles, helping to improve your accuracy of bricklaying.This quality laminated, waterproof tape ...

Block Paving Gap Wedge Tool ●To enable repairs or adjustment.●900mm long handle●Soft grip rubber handles●Hammer point to knock in to tight spaces●F...

The Brick Clamp is a top clamp to secure the profile for full/double brick jobs.Suitable for standard 2"/ 50.5mm profiles or up to 60mm profiles.Ma...

4in. / 100mm Pointing Trowelwith wooden handle

Clamp Length: 103mm - suits half brick. Bar thread length: 80mmMaterial: Zinc plated steel for superior corrosion resistance

13in. / 330mm Bricklaying Profile ClampSliding withT-Bolt Screw / 80mm ThreadSolid Steel / Zinc Plated

Dutch Pin / Masonry Clamp250mm Corrosion resistant steel shaft.Ideal for hammering into plaster and most masonry work.No more nailing boards.Makes ...

3 Way Timber ClampAllows one man to set the profile plumb using timbers.Holds timbers from 76 x 76mm to 38 x 38mm.Zinc plated to prevent corrosion.

Replacement G-Bracket for 19mm Top Clamps. ●Replacement G-Bracket for 19mm Top Clamps.●Zinc plated to prevent corrosion

Brick Jointer with 4 interchangeable Steel BarrelsSizes : 1/2 | 5/8 | 3/4 and 7/8in.Cast aluminium handle with increased knuckle roomSupplied with ...

Dutch Pin / Masonry Clamp300mm Corrosion resistant steel shaft.Ideal for hammering into plaster and most masonry work.No more nailing boards.Makes ...

5.5in. / 140mm Bricklaying Profile ClampT-Bolt Screw / 80mm ThreadSolid Steel / Zinc Plated

265mm T-Type Bricklaying Profile ClampZinc plated to prevent corrosion.

'D' Type Brick Holding TongsAdjustable 400 to 725mmAutomatic JawsDesigned to carry 6 - 10 bricks

70M Blue Brick LineCardboard CoreNot affected by mortar / oil or mildew and will not absorb waterIdeal for masonry work and landscaping.

Line Blocks with 18M LineL - Shaped plastic blockEasy Line adjustment and storage18 metres polyethylene brick line

TCT Masonry SawHeavy Duty with 25 Teeth and 13 Tungsten Carbide Tips.Rust Resistant Coated Blade with Rubber / ABS Handle.Use to cut Brick / Aerate...

10mm Finger Trowel

Setting device as supplied with new profilesCan be supplied as setting device plus screw for ease of posting.

8in. / 200mm Bricklaying Profile ClampT-Bolt Screw / 80mm ThreadSolid Steel / Zinc Plated

600g Brick HammerHandle bonded to bodyHigh Quality Unbreakable Fibreglass CoreHigh Grade SteelCushion Grip Rubber Handle Head

7in. / 180mm Bucket Trowelwith Cushion Rubber Grip

Clamp Length: 103mm - suits half brick. Bar thread length: 80mmMaterial: Zinc plated steel for superior corrosion resistance

3pc Margin Trowel SetSizes : 13 | 38 | 51mmHardened and Tempered Steel Bladeswith Cushion Grip HandlesUsed for Edging / Textured Coatings and Plast...

70M Pink Brick LineCardboard CoreNot affected by mortar / oil or mildew and will not absorb waterIdeal for masonry work and landscaping.

The 4-inch Bolster Chisel (also known as a Masonry Chisel) with a flat blade measuring 100mm x 250mm long is a sturdy tool designed for cutting and...

Solid SteelDURAGRIP T bolt thumb screwZinc platedNew 'thread insert' threading system40x40mm eye