HGV & COMMERCIAL VEHICLES

INNER: 80MM; OUTER: 95MM; H: 175MM; STUD:87mm; STUD WIDTH: 10mmLOCATING TUBE: 49MMInternal square drive to DIN 3121/ISO 1174.Rigid locating tube.Op...

Ball Joint Separator 39mm Ball Joint Remover for Commercial VehiclesFor use on most trucks including - Scania / Mercedes-Benz / MAN etc.Ideal fo...

●3/4'' Drive●Inner: 100mm●Outer: 123mm●Height:84mm●Positive drive of the axle nut●Any extensive slipping is avoided.●Milled out profile.●Robust exe...

INNER: 105MM; OUTER: 125MM; H: 180MMSTUD:116.5mm; STUD WIDTH: 9.8mmInternal square drive to DIN 3121 /ISO 1174 .Rigid Locating tube.High accuracy o...

Six side drive SW60.Special robust execution designed to remove the front axle nut.Made from special steel for high tightening and loosening torque...

Trucks Injectors Adaptor ● Special designed set for testing leaks in heavy goods vehicles(HGV) cooling system●Adaptors have quick-release couplings...

This heavy-duty 80mm front hub nut socket is made particularly for Scania vehicles. It gives a dependable and secure hold on the hub nut with its 1...

INNER: 95MM; OUTER: 115MM; H:110MM; STUD :101MMSTUD WIDTH:11.5MMInternal square drive to DIN 3121 /ISO 1174. Optional with sleeve Locating tube.Hig...

Designed to ensure the correct fitment of the rear crankshaft oil seal on the 3.5 tonne Isuzu truck diesel engines, for preventing the oil seal fro...

MAN / TGA Front Axle Lock Nut Socket3/4in.Dr / 60mm Hex Drive.Inner diameter : 134mmOuter diameter : 147mmLug diameter : 118mm / width 11mmApplicab...

Extension Tube for MAN TGA Rear AxleFor the removal and installation of wheel hubs.Protects the wheel bearing and threaded bolts.With knurling and ...

Made from special steel and robust execution to remove the axle nut.Any extensive slipping is avoided.Use with an impact wrench or torque wrench, d...

For resetting the brake pistons on Iveco disk brakesSuitable for Iveco Stralis, Eurocargo, DailyIncludes the following tools:10 mm ratchet wrenchre...

24pcs 3/4" and 1" drive impact socket and bit set that includes a comprehensive selection of hex, star and spline profiles.                        ...

3/4"DR; INNER: 28.5MM; OUTER: 53.9MM; H:50MMScania Front Wheel Shock Absorber Spring Washer Socket,(28mmX37mm Dr.3/4") ●3/4'' Drive●Size: 28 x 37mm...

 The rear axles cover extractor socket. Size: H41 x 120mm ( oval internal profile)  ●The rear axles cover extractor socket.●Size: H41 x120mm(8PT) ●...

●The rear axles cover extractor socket.●Size: Hex 41mm x109mm(8PT) ●Applicable: BPW 12T ●8PT●For loosening/tightening the rear axle hub retaining n...

The diesel cylinder sleeve puller set is used for pulling off worn-out cylinder sleeves on passenger cars or commercial vehicles.Application: Wet h...

Crankshaft Alignment Tool1/2in.Drive with 2 gearsUsed in conjunction with 1/2in.Dr RatchetAllows the engine crankshaft position to be manually rota...

Special 6 teeth designed to remove the differential rear nut.Made from special steel for high tightening and loosening torque.Applicable: MAN, Merc...

Allows safe compression of the cabin spring for shock absorber removal. Spring size - ID: 65mm, OD: 89mm.Use with 1/2'' Dr ratchet. Application: Vo...

Required when repairing the drum brakes.Designed for opening and fixing the brake shoe retaining spring.Designed for the dismantling and assembling...

MAN Truck Transmission Socket,53mm Designed to remove the transmission nut on MAN trucksSize: 3/4" DR x 53.5mm / 4PTOverall length: 75mm ●Designed ...

For the removal and installation of HGV cab shock absorbers.For counter holding the piston rod and simultaneous turning of the screw cap.Upper base...

BPW Axle Extractor - M136 x 2.5Extremely robust European truck repair tool applicable to :BPW ECO Plus 8 - 12 ton and BPW ECO 10 ton models.Used in...

●For removing full and half-round yokes on heavy-duty trucks without causing damage. ●Designed for use on Class 6-8 trucks, this tool provides high...

Designed for damage-free installation of the rear crankshaft seal ring.Application on Scania (114) 340/360/380.Suitable for seal rings 140x160x12 m...

Front Main Crankshaft Oil Seal Installer - ISUZU 3.5T Designed to ensure the correct fitment of the front crankshaft oil seal on the 3.5 tonne Isuz...

Specially designed  for removal and installation of valve springs on japanese truck engines.Applicable: Mitsubishi Fuso 3.5 t., Fuso over 15 t.Hino...

Used for adjusting automatic slack adjusters. Fork-end designed tool able to fit securely under the pull pawl allowing handsfree operation to relea...