Power Tools

6pc Square Auger Drill Bit SetSizes : 6 | 8 | 10 | 12 | 14 | 16mmMortising Chisels - use with mortise machines to cut square recesses.Ground and Po...

5pc Wood Auger Drill Setwith SDS ShankSizes : 10 | 13 | 19 | 22 | 25mm

5pc Wood Auger Drill SetSizes : 10 | 13 | 19 | 22 | 25mm210mm Long with Hex Shank

5pc Wood Auger Drill SetSizes : 6 | 8 | 10 | 12 | 14mm230mm Long

4pc Wood Auger Drill SetSizes : 8 | 12 | 16 | 24mm x 600mm longHexagonal Shank Fitting

SDS Wood Drill Adaptor / Extension - 3in. / 80mm LongEnables 6mm Hex Shank Wood Drill Bits to be used with SDS Drills

13pc Flat Wood Drill SetSizes : 6 | 8 | 10 | 12 | 13 | 14 | 16 | 18 | 19 | 20 | 22 | 24 | 25mmwith 6mm Hex Shank

6pc Flat Wood Drill SetSizes : 10 | 12 | 16 | 18 | 20 | 25mmwith Partial 6mm Hex Shank

6pc Flat Wood Bit SetFull-cone threaded tip for fast and effortless drilling.Contoured paddle for fast chip removal.Hex shank power groove to reduc...

7pc Drill Set with Integral CountersinkSizes : 5 | 6 | 7 | 8 | 9 | 10 | 12mmwith Hex Wrench

Straight Hole Doweling Jig KitFor drilling equally spaced holes.Drill sizes : 6 | 8 | 10mm.Positioning pin : 6 | 8 | 10.Suitable wood width : 17 - ...

15pc Wood Drill SetDowel Drill BitsSizes : 3 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | 5 | 5.5 | 6 | 6.5 | 7 | 8 | 10mm

9pc Wood Drill SetDowel Drill BitsSizes : 5 | 6 | 8 | 10mmDrill Saw - 6 x 85mmWood Rasp - 56mmCountersink - 1/2in. / 12mmPlus 3 Rotary Burr

3pc Wood Drill SetSizes. 6. 8. 10mm x 300mm

6pc Square Right Cutting Countersink Bit SetSizes : 6 | 8 | 10 | 12 | 14 | 16mm

6pc Square Left Cutting Countersink Bit SetSizes : 6 | 8 | 10 | 12 | 14 | 16mm

Replacement Generator Fuel Tapfor Generator CT4540

Replacement Generator Speed Limiterfor Generator CT4540

Belt Driven Air CompressorAluminium cylinder head with cast iron cylinder gives added resistance to wearSuitable for the professional / garage / bo...

Replacement Pull Cord / Housingfor Generator CT4540

30mm Cylinder with water separatorPressure - 40psiVoltage - 230 / 50HzAir Flow - 20 L/min1/4 NPT Connector1/8 NPT Air Outlet1/800hp / 1700rpm5M Air...

Impact Drill - 230V / 800W / 50HzChuck Size : 13mmNo-Load Speed : 3000 rpmWith Adjustable Handle and Chuck Key

18V Battery ChargerSpare Charger for Cordless Mitre Saw - CT5305

18V BatterySpare Battery for Cordless Mitre Saw - CT5305

Auto-Load Cordless Screwdriver - 4Nm3.6V Li-ion Battery | 1300mAh 3 hour usewith 55pc Bit Set and 5pc Drill SetLED light for point of work illum...

3.6V Cordless Screwdriver1.3Ah Li-ion Battery3.5Nm Torque with 22 settingsCharge time - 3-5HrsQuick release bit holderForward and Reverse actionWor...

5pc Titanium Coated Countersink SetSizes : 8 | 10 | 12 | 16 | 19mm.For use in wood and most countersink jobs.Titanium Nitride coated bits for longe...

Replacement 18V Battery18 Volt / 3Ahfor Cordless Sets CT3142

4pc Slotted Countersink SetHSS / 4241 Titanium Coated with round shanks.For drilling cone hole and chamfering the edges.Ideal for cutting through m...

4pc 1/4in. Shank Countersink SetSizes : 12 | 16 | 19mm with Handle

9in. / 230mm Angle Grinder - 110VInput Power - 2380WFrequency - 60 HzNo-load Speed - 6600rpm Spindle Thread - M14Noise Level - 85 / 103.5 dB/ASoft ...

9in. / 230mm Angle Grinder - 230VInput Power - 2380WFrequency : 50 HzNo-load Speed : 6600rpmSpindle Thread : M14Noise Level : 85 / 103.5 dB/ASoft S...

110V Angle Grinder - 115mmInput Power : 750WFrequency : 50 / 60HzNo-load speed : 11000rpmDisc diameter : 4.5in. / 115mm

300mm Laser Welded Diamond Cutting DiscCutting Depth : 50mmBore size : 20 - 25.4mmSpeed : 5100rpmTeeth : 21All Purpose ideal for Disc Cutter CT5342

300mm Laser Welded Diamond Cutting DiscCutting Depth : 50mmBore size : 20 - 25.4mmSpeed : 5100rpmTeeth : 21All Purpose ideal for most building mate...

230mm Turbo Diamond Cutting DiscCutting Depth : 80mmBore size : 22.2mmSpeed : 6600rpmGeneral Purpose for most construction materials

230mm Continuous Rim Diamond Cutting Disc2mm Tile Cutting DiscBore size : 22.2mmSpeed : 6600rpmwith Laser Slots

230mm Laser Welded Diamond Cutting DiscCutting Depth : 80mmBore size : 22mmSpeed : 6600rpmAll PurposeAsphalt | Concrete | Steel | General Building ...

115mm Turbo Diamond Cutting DiscCutting Depth : 30mmBore size : 22.2mmSpeed : 13200rpm / 80m/sGeneral Purpose for most construction materials

115mm Continuous Rim Diamond Cutting Disc1.2mm Thick - Super Thin Rimfor Dry or Wet CuttingBore size : 22.2mmSpeed : 13300rpm / 80m/s