Steering and Suspension

43pc Turnbuckle for Shock Absorber TopFor counter holding the piston rod while loosening.Go-Thru Ratchet : 19 | 22mm.Deep Sockets : 14 | 16 | 17 | ...

Track Rod End Remover / Installer Set - 4pcFor easy removal and replacement of the inner steering ball jointwithout the need to dismantle the steer...

Air Powered Hydraulic Coil Spring Compressor Station1000kg Air Actuated Hydraulic Unit with Alternative Foot OperationQuicker and Easier than using...

2pc Coil Spring CompressorFor use with 21mm socket or spannerTotal Length : 280mmFor the quick and safe removal or installation of coil springs.Sui...

Mercedes M-Class Ball Joint Pin Socket3/4in.Dr / 4 PinFor ML-class W163 < 2005 and W164 2005 <For servicing the front and rear axle suspen...

The Bushing Tool for Tesla Model 3 Electric Motor is a specialized tool designed for servicing the front electric motor of the Tesla Model 3. It is...

17pc Bearing and Bushing Driver SetFor Bearings / Vibration Isolators / Silent Blocks3 Driver Handles : 113mm | 140mm | 162mm14 adaptors : ID 10 - ...

Differential Front Bush Tool Set For BMW  ●Suitable for the removal/installation of the front differential bush on BMW●Applicable: BMW 5,6,7 series...

Rear Suspension Bushing Isolator Removal Toolfor Vauxhall / OpelFor Upper and Lower Suspension Bushings

Bushing Service Tool - VAGFor replacing the front suspension bushingson VW Polo 2002 and later.

Automatic Transmission Clutch Spring CompressorFor servicing the transmission rear clutch Piston snap ring.Adjustable for most cars and light truck...

For quick and easy disassembly of universal joints on cardan shafts.Puller foot opening: 65 mmPuller foot height: 8 mmPuller foot depth: 65 mmTotal...

2pc Coil Spring Compressor for MacPherson StrutsCompresses the coil spring to replace the shock absorber unit or spring.Widely used on the front su...

14pc Master Set Ball Joint Adaptor KitThis tool kit is designed to provide adaptors for all carsvans and light trucks that have press-fit type ball...

5pc Ball Joint and Tie Rod Separator SetTie Rod/ Pitman Arm Tool KitTie Rod Spreader with 11/16in. Wedge OpeningBall Joint Separator with 15/16in. ...

Universal Bearing Packer111mm Cone Diameter.Suitable for packing bearings with an even spread of Grease.A Clean and Quick method - place bearing on...

Steering Wheel Remover / Lock Plate CompressorFor vehicles with or without Tilting SteeringCompresses steering wheel lock plate to remove and insta...

Suitable for the Removal and Installation of the rear mounted Bushing Isolators.Can be used in-situ without removing the rear Subframe from vehicle...

BMW Rear Axle Bushings Service KitFor the Removal and Replacementof Rear Axle Bushings / Metallic Vibration Isolators.Applicable to :BMW E38 | E39 ...

For the removal / installation of the front Bushing Isolators on VW vehiclesCan be used in-situ without removing assembly from vehicleMounting adap...

23mm Ball Joint Remover for cars, light trucks and SUVOpening on the support fork: 23 mmOpening on the puller housing: 56 mmMax. pressure range: 59...

Pump Pulley Kit for Power Steering on Ford / GM and Chrysler vehicles with Saginaw / Thompson / Ford C111 and C2 power steering pumps.Fits 1 1/8 . ...

24mm Puller for Land Rover Steering Drop ArmsFor removing the steering drop arm from the steering box.Over time the steering drop arm and boxcan co...

Replacement Pedalfor Coil Spring Compressor Station CT1946

Comprehensive kit to remove and install ball joints in the rear wheel carrier, ball joints and rubber bearings in the longitudinal arms, rear axle ...

Ball Joint Socket for Renault1/2in. Drive 40mm / 45mm Deep4 Round Pins with 7.75mm diameter.Designed to remove the screw in type lower joint from t...

Universal Ball Joint PullerFor all types of vehicles20mm Jaw opening adjustable up to 50mm

Air Valve Spring Compressor SetPrevents the engine valve from falling into the bodydue to counter pressure caused by air delivered via a spark plug...

●Applicable to: Peugeot-405,406,407,605,607                              Citroen-Xantia-C5,C6●Suitable for removal of OEM and after market lower ba...

21pc Master Adaptor Set Ball Joint Service KitWith 4 Wheel Drive AdaptorsBrake Anchor Pin Removal and InstallationThis tool kit is designed for use...

Specially designed  for removal and installation of valve springs on japanese truck engines.Applicable: Mitsubishi Fuso 3.5 t., Fuso over 15 t.Hino...

●Heavy-duty ball joint separator tool, equivalent to JLR OEM 204-793A, for use on various Land Rover and Jaguar vehicles. ●The scissor type design ...

Steering Wheel Lock Plate RemoverIdeal for detaching steering column lock plates on the majority of cars with air bags1-9/16in. x 18mm and 14 x 1.5...

Spare Bar for CT1792 Strut Coil Spring Compressor

Steering Wheel Puller2 Leg Puller - 90 /140mm longYoke and Thrust Bolt2 Thrust CapsSpread 38 - 85mmFor use on Ford and GM / Vauxhall / Opel vehicles