Steering and Suspension

Pump Pulley Kit for Power Steering on Ford / GM and Chrysler vehicles with Saginaw / Thompson / Ford C111 and C2 power steering pumps.Fits 1 1/8 . ...

Steering Arm Removal Tool - 35 / 45mmTrack Rod End Remover27mm Hex or 1/2in Drive /400mm LongSuitable for most European vehicles

24mm Puller for Land Rover Steering Drop ArmsFor removing the steering drop arm from the steering box.Over time the steering drop arm and boxcan co...

Manual and Hydraulic Coil Spring Compressor Work Station1000kg Foot Operated Hydraulic UnitQuicker and Easier than using ratchet driven spring comp...

Comprehensive kit to remove and install ball joints in the rear wheel carrier, ball joints and rubber bearings in the longitudinal arms, rear axle ...

Ball Joint Socket for Renault1/2in. Drive 40mm / 45mm Deep4 Round Pins with 7.75mm diameter.Designed to remove the screw in type lower joint from t...

Universal Ball Joint PullerFor all types of vehicles20mm Jaw opening adjustable up to 50mm

Medium Universal Press Support RingOuter diameter : 140mmInner diameter : 120mmHeight : 160mmWall : 10mmCapacity : 40Tfor the removal of Wheel Bear...

Steering Wheel PullerThis robust kit is used for removing automotive steering wheels.Built-in bearing steel balls makes removal extremely easy.2 an...

The drive shaft clamping tool is a replacement for Camry Corolla models, the size and structure perfectly match the model requirements.OE number of...

Air Valve Spring Compressor SetPrevents the engine valve from falling into the bodydue to counter pressure caused by air delivered via a spark plug...

●Applicable to: Peugeot-405,406,407,605,607                              Citroen-Xantia-C5,C6●Suitable for removal of OEM and after market lower ba...

Specially designed  for removal and installation of valve springs on japanese truck engines.Applicable: Mitsubishi Fuso 3.5 t., Fuso over 15 t.Hino...

Spare Bar for CT1792 Strut Coil Spring Compressor

Steering Wheel Puller2 Leg Puller - 90 /140mm longYoke and Thrust Bolt2 Thrust CapsSpread 38 - 85mmFor use on Ford and GM / Vauxhall / Opel vehicles

VAG Camber Adjustment Tool Set22mm Hexagonal Spindles3 Spindle Lengths : 75 | 85 115mmPressure width 135 to 175 mmAllows one person adjusting reduc...

Trailing Arm Bush Tool Set ●It's designed for disassembly and assembly of the silent bearings in the trailing arm of the rear axle, no disassembly ...

Mercedes Bushing Service KitFor removing and installing Screw Pivot Bushing Isolator.Applicable to Mercedes Benz W220 / W211 / W203

Fiat Rear Bushings Service KitFor the installation of rubber bushings /vibration isolators on rear axles.Applicable to :Fiat Stilo / 01 - 07Fiat Br...

For removing and installing steering and suspension Bushing Isolator.Applicable to BMW E31 / E32 / E34 / E38 / E39 / E53 / E60 / E65 / E66and Merce...

VAG Front Bushings Service KitFor the installation of rubber bushings / silent blocksor vibration isolators on front axle brackets.Applicable to :A...

Rear Sub-Frame Bushing Isolator Kit for Ford Mondeo

VW / Audi Bush Remover / InstallerVAG Bushing Service KitSuitable for the Bushing Isolators on Audi / VW vehicles.

BMW Bushing Service KitFor removing and installing Screw Pivot Bushing Isolator.Applicable to BMW E31 / E32 / E34 / E38 / E39 / E53 / E60 / E65 / E66

Automatic Transmission Clutch Spring Compressor4 Leg Capacity : 64mm to 175 mm Diameter.For replacement of rear transmission clutch Piston snap rin...

Axle Backlash TesterFor localising the source of common faults around the wheel axle.Suitable for testing under load conditions on cars up to 3.5 T...

Tie Rod Service SetFor tie rod servicing without additional alignmentReduces the workload when changing tie rods.For replacement of defective tie r...

1/2in.Dr Rack Wrench25 - 55mm Heavy Duty Steering Rack Tie Rod WrenchUse to service all inner tie rod ends.Prevents damage to rack components.Us...

5pc Tie Rod / Pitman Arm Adjustment Set1/2in.Dr Suitable for cars / vans and trucks.Sizes : 3/4 | 7/8 | 9/8 | 23/16 | 29/16in.Allows 360 degree rot...

Pitman Arm PullerOpening Size : 33mmPull travel 63mmFits most cars and vans

Replacement Winding Mechanismfor Coil Spring Compressor CT2614

CV Joint Spring Ring PliersThis tool is specifically designed to aid the secure removaland re-installation of the CV Joint Spring Ring without dama...