neilsen

For removing of inner wheel bearing rings on wheel hubsthe bearing rings usually remain on the wheel hubs when disassembling the wheel bearingClamp...

Ribbed Belt tensioner | for Mercedes-Benz W169 & W245for tensioning and loosening the damper spring personalprevents damage to the tensioner el...

Brake Bleed Catch Bottle Kit ●Simple to Use●Everything needed to quickly bleed brakes with no mess●Plastic bottle collects discharged fluid●Three s...

Use to plug steel lines once disconnected. Prevents fluid leaks and contamination during service Use with any automotive fluid Spring loaded des...

Application:Citroen: Relay/Jumper (01-02), Relay/Jumper II (02-06)Fiat: Croma (86-97), Ducato (86-06), Talento (87-94)Iveco: Daily (91-06), Turbo D...

From 2011 the fuel pump sprockets no longer have threaded holes fitted in them, this tool allows the pump removal without removing the timing chain...

Special bit sockets for assembly and disassembly of plastic oil drain screw on plastic oil sumpsExternal hexagon driveWith internal square driveWit...

Specifically designed to aid the removal of seized Injectors.To be used in collaboration with Air Vibration Hammers.Allows effective transmission o...

Wheel Hub Removal Tool For Seized Hubs ●It's specially designed to assist in the easy removal of seized wheel hub with ease.●Covers most cars &...

DCT wet clutch oil seal fitting kit for Ford and Volvo. Includes the seal guide and cover press, used for the fitting of the clutch cover without d...

Adas Park Assist Camera Positioner For Volvo XC60 S80 S60 V90 V60 ●It's designed to ensure the correct position of the front facing parking assista...

 Front Facing Radar Sensor Positioning Tool For ADAS On Volvo ●It's designed to ensure the correct position of the front facing radar sensor on Vol...

Designed to removes the low pressure fuel Line that supplies the high pressure fuel pump.Fits the following mini cooper s models with the N14 or N1...

Heavy-duty frame and screw for rigidity. Two jaw sizes. For Briggs and Stratton, Clinton, Harley-Davidson, etc.For springs 3/4 inches to 1-1/16 inc...

For quick and accurate alignment of the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment.Widely u...

Wheel Bearing Circlip Removal & Assembly Lever Tool ●Specially designed lever that allows the easy removal and fitting of wheel bearing interna...

Clamping Washer Heat Shield Tool ●For the quick and safe removal/fitting of clamping washers which are used on underbody heat shields etc.●Applicat...

ADBLUE Tank Cap Remover For PSA Citroen Peugeot C3 Picasso  ●Ideal for removing the tank cap when stuck due to area crystallisation.●Applications:P...

Diesel Fuel Filter Socket 32mm Ford Transit Custom MK8 2.0TDCI ●Application: Ford Transit Custom Mk8 2.0 TDCi (from 2016)●1/2"D x 6PT profile.●For ...

Specialist tool designed to be used when removing the top of Macpherson strut mounts. These are commonly found on Audi, SEAT, Skoda and VW vehicles...

Designed socket for Mercedes-Benz valve adjustment.Application on Mercedes-Benz M100, 110, 114, 115, 123, 130 models.Size: 17mm x 1/2"D.

2pc Lever Set For Clutch & Transmission Work, Ball Joints, Bushes ●This set of two heavy duty forked pry handles are ideal for clutch and trans...

Designed to allow for the quick and safe removal of drive shafts by connecting properly with the locking clip rings found on many front wheel drive...

Application:Volkswagen Go+C8 2009.Seat: Ibiza 2008, Altera 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013.Audi A3 2009/2013.Cont...

6PC SAS Clutch Centering Alignment Tool For BMW ●SAC clutch mandrel kit for centring the clutch disc on the flywheel while installing the self adju...

Provides a safe and controlled method of adjusting the tensioner position during removal and installation of the auxiliary belt.Includes various ad...

Applications: Silent bushings, hydraulic bushings, ball bearings, oil seals, rubber bushings, etc.This kit is ideal for different commercial vehicl...

Slide the powder-coated tool downward between the window exterior and the door. The channel side of the tool should face the door. When the tool ch...

Intermediate Lever Spring Removal Tool For B38 B48 ●Designed to safely remove and refit the intermediate shaft control springs used on the Variable...

Intermediate Lever Spring Removal Tool For BMW, Mini, Citroen, Peugeot   ●Designed to safely remove and refit the intermediate shaft control spring...

Special design to remove an install the intermediate shaft control springs used on VVT system found on BMW petrol engines.Applications include: BMW...

Prevents spindle from spinning when tightening or loosening wheel nut. Use appropriate socket on free end of tool to hold spindle. 6 different inte...

Swinging arm pivot nut toolApplication: Suzuki SV650/1000, Dl650/1000,V-Storm plus some Hayabusa, Bking and GSX-R750/1000/1100Material Chrome Vanad...

This tool kit has been designed to lock the cam and crankshaft in position to allow the removal and replacement of the timing chain fitted to the n...

For resetting the brake pistons on Iveco disk brakesSuitable for Iveco Stralis, Eurocargo, DailyIncludes the following tools:10 mm ratchet wrenchre...

For loosening and tightening the flywheel and crankshaft pulleySuitable for the following Ford models:Models: Ford C-MAX (2007-2017), S-MAX (2006-2...

Brake Drum Gauge 160 - 360 MM ●Developed to measure the wear limit on brake drums as well as the diameter of the drum and then establish the shoe p...

●For checking and adjusting the engine timing.●Contents:-Camshaft locking & adjusting tools, to be used as OEM 1860874000, 1860874000, 18609850...

Master Engine Timing Tool Set For Fiat, Alfa, Lancia, Opel, Suzuki, Ford ●For checking and adjusting the engine timing ●Suitable for the following ...

For checking and adjusting the engine timing Suitable for the following models:Audi 80, A1, A2, A3, S3, A4, A5, A6, TT, Q5Seat Arosa, Ibiza, Cordob...

Master Engine Timing Tool Set For Ford, VW, Seat, Mazda, Volvo  ●For checking and adjusting the engine timing ●Contents:-Camshaft adjusting tools, ...

It's designed for separate the suspension strut from wheel bearing housing. The internal expansion of the tool is powered by screws and its operati...

Made from POM material which is rigi and nono marking and ideal for use on aluminium panels.Contents: 1. Long Type Curved Dolly2. Curved Dolly3. Ut...

Four universal cone adaptors fit a wide range of vehiclesHand pump with gauge allows simple and easy controlled testingRelease pin allows depressur...