neilsen

Enables body shop mechanics to keep the lift gate or hatch partially open for sanding, painting, buffing,or fully open for convenient lift strut re...

Allows body shop technicians to hold lift gate or hatch in a partially open position for sanding, painting, buffing,or totally open to easily repla...

●A two piece kit including a pin puller and a pin popper, removes door hinge pins fast.●Better clearance for door panels.●Direct impact design.●Dri...

It's the essential tools required to lock the latest generation 1.0lt and 1.3lt Fiat petrol engines in their timed position when removing and refit...

Suitable for classic cars and high quality vehicles.Prevents damage to chrome-plated or anodised screws, nuts, trim strips, ornamental rings, wheel...

Vibration Damper Pulley Removal Tool, for damage-free removal of the the vibration damper with internal thread. Suitable for 2.0TDi Bi-Turbo engine...

Stainless  steel, hot forged.Ring end hexagon profile, with 20° offset.Suitable for small spaces.8pcs Combination Spanner: open end size 3.2 mm / r...

Loading Capacity:1000KGSLifting height range: 550-1750mmTable Size::1500 x 800mmDistance of moving the table in four directions: ±40mmDual pump &am...

●Specially designed to remove stripped, damaged and broken nuts, bolts, hex, screws, etc.Innovatively engineered to easily extract even if they are...

●Specially designed to remove stripped, damaged and broken nuts, bolts, hex, screws, etc. Innovatively engineered to easily extract even if they ar...

●Specially designed to remove stripped, damaged and broken nuts, bolts, hex, screws, etc.Innovatively engineered to easily extract even if they are...

●Thread chaser for M22 x 1.5 sensor ports often used for NOx (Nitrogen Oxide sensors), suitable for cleaning and repairing damaged threads on senso...

●Fuel Vaporiser Port Thread Chaser for Ford M20 x 1.5mm,  suitable for cleaning and reforming threads on exhaust system fuel vaporiser ports.●The s...

PNEUMATIC INJECTOR REMOVAL EXTRACTOR PULLER TOOL SET  Air Vibration Injector Removal Extractor Pneumatic Puller Tool Set It's designed to use combi...

To protect your engine, oil filter cutters allow you to cut through old filters to find problems before they cause damage to your engine. Help you ...

Applications include: Ford 1.6, 2.0, 2.2L Duratorq ecoblue diesel engines form 2012 onwards.For removing Ford DPF fuel vaporiser -22mm 6 point.Usef...

●15” Diameter Pad Protects Floors & Work Area from Messy Oil Splatter, also can residues filter oil.●Porous material allows fluid to quickly pa...

●Ideal for the quick removal of pinstriping, decals, stickers, adhesive tape, and residue from car bodywork without damaging the surface, also suit...

●Fluted stripe off disc with heat dissipating pattern for removing pinstriping, decals, stickers, adhesive tape, and residue from car bodywork with...

●Suitable for the quick removal of pinstriping, decals, stickers, adhesive tape, and residue from car bodywork without damaging the surface.●The fl...

●Special socket for removal and installation of the oil pressure control solenoid switch on Mercedes M651 diesel engine manufactured from 2010.●App...

Operation of damaged 21 mm wheel nuts20.5 mm impact socket for wheel nuts with missing chrome cap21.5 mm impact socket for wheel nuts with deformed...

Stubby & low profile design for working in confined areas.The knurled edge for enhanced grip.Ball-detent locking.CRMOContents:1/4'' Female to 3...

Stubby & low profile design for working in confined areas.CRMO1/4 F x 3/8 M

Stubby & low profile design for working in confined areas.CRMO3/8 F x 1/2 M

Stubby & low profile design for working in confined areas.CRMO1/2 F x 3/4 M

The diesel cylinder sleeve puller set is used for pulling off worn-out cylinder sleeves on passenger cars or commercial vehicles.Application: Wet h...

Provides greater access to hard to reach areas.Size: 8 x 9mm.Length: 235mm. 6PTManufactured from chrome vanadium.

Provides greater access to hard to reach areas.Size: 10 x 12mm.Length: 242mm. 6PTManufactured from chrome vanadium.

Provides greater access to hard to reach areas.Size: 11 x 13mm.Length: 280mm. 6PTManufactured from chrome vanadium.

Provides greater access to hard to reach areas.Size: 14 x 15mm.Length: 330mm. 6PTManufactured from chrome vanadium.

Provides greater access to hard to reach areas.Size: 16 x 18mm.Length: 380mm. 6PTManufactured from chrome vanadium.

Extra long, double ended flexible flare nut wrench provides greater access to hard to reach areas.Provides greater access to hard to reach areas.Si...

Extra long, double ended flexible flare nut wrench provides greater access to hard to reach areas.Provides greater access to hard to reach areas.Si...

IDEAL FOR USE WITH TORQUE WRENCHES: setting adjustment is required to compensate for the increased length of leverage when using these torque adapt...

●Manual tool to remove gears,pullers,bearings,steering wheels, ets.●Suitable for large bearing removal on vehicles, ATV's and light trucks.●Use tog...

●Heavy-duty ball joint separator tool, equivalent to JLR OEM 204-793A, for use on various Land Rover and Jaguar vehicles. ●The scissor type design ...

●Suitable for Motorcycles and ATVs and most of motorcycle models. ●Made of aluminium alloy, strong and sturdy, long service life.●Clamp the chain a...

●Engineered to simplify the removal process, reducing the time and effort required for suspension repairs.●Precisely position and pry the lower con...

●Application:FORD 1.0 l / 1.1 l and 2.0 l EcoBoost enginesB-Max, C-Max, EcoSport, Fiesta, Fiesta, Active, Focus, Grand C-Max, Grand Tourneo ,Connec...

●Multi-Angle Jaws Fuel Line Pliers designed to remove quick connect with snap/side lock couplers, such as SAE J2044, in fuel, EVAP, SCR (AdBlue), c...

●The master kit features all the tools that allow the most cost effective method of timing these engines depending on the cam cover fitted (early E...

●This camshaft locking tools for VAG TSi 1.0 1.2 1.4 Petrol engines and covers the ACT (CoD) derivatives. ●Applications: Audi (from 2012), Seat (fr...

●Applications: Audi (from 2017), Seat (from 2015), Skoda (from 2015) & Volkswagen (from 2015).●Engine applications: 1.0L, 1.2L, & 1.4L TSi ...

●Exhaust Camshaft Adaptor  (1.4 TFSI COD, TSI ACT, TFSI,BlueGT TSI ACT)●Applications include: Audi A1 (2012 - 2018), A3 (2012 - 2019), Q2 (2016 - 2...

●Applications: Seat Arona (from 2020), Ibiza (from 2015), Leon ST (from 2014), Mii (2012 - 2020), Toledo (2015 - 2016). Skoda Fabia III (2014 - 202...

●This product is a automobile brake fluid/coolant boiling point detector. Detecting the boiling point of brake fluid to judge the quality of brake ...